← How-To Guides

How to measure cabinet hinge overlay

Find how far your closed cabinet door covers the opening so you can narrow down the right hinge and plate.

  1. Check how the door sits

    Close the door and look at the hinge side. An overlay door covers part of the frame or the cabinet side. An inset door sits within the opening. Record which style you have and whether the cabinet has a separate face frame.

  2. Mark the edge of the closed door

    Use low-tack tape to mark where the hinge-side edge of the door meets the face of the cabinet. Open the door and measure from the opening edge to your mark on the cabinet face. That distance is the overlay on that side.

  3. Write down the other fit details

    Record the stamp on the hinge and the plate. Measure the round cup bore and the center-to-center distance between the hinge fasteners on the door. Measure the frame-side holes separately. Keep the measurements in the same unit as the manufacturer diagram when you can.

  4. Compare the old and new hardware

    Check the overlay, cabinet style, and both drilling patterns against the replacement drawings. A part can match the measured overlay and still need a different mounting plate or new screw locations.

Source documents