Replacing a Grass 830 hinge with a TEC 864
Use the old plate number and door overlay to choose a replacement and check which holes the retrofit reuses.
Start with the old base plate
Read the code on the cabinet-side plate. For example, Grass lists a 1⅜″ overlay for 830-13 and 830-20. The old code 830-16 uses a different overlay and its documented replacement includes a spacer.
Decide whether you want soft-close
The Grass chart shows separate self-closing and soft-closing choices for several plate codes. Soft-close adds damping. Record the part number for the option you intend to buy and check the chart for a spacer or other additional piece.
Compare the mounting holes
The retrofit drawing shows the round cup bore and the cabinet-frame holes reused in the documented 830 installation, with new door-side screw locations. Compare the old and new parts on your specific door before making the new holes.
Use the installation sheet for the retrofit
Follow the manufacturer drawing for fasteners and hole placement. Grass advises replacing all hinges on the same door with the same replacement type so they operate together.