Grass TEC 839 and 850 hinge replacement chart

Compare all 5 plate stamps in the Grass TEC 839/850 chart for face-frame cabinets. Match your stamp and door overlay to see hinge part numbers, spacers, and fitting instructions.

Concealed cabinet hinge and screwdriver on a wood workbench
Cabinet hinge retrofit illustration

Match your plate stamp

Use the stamp and your actual measurement together. A chart match shows the listed parts and where to check the mounting details.

Find the two details

  1. Read the cabinet-side plate.

    Use the full number stamped on the plate. See where to look.

  2. Measure with the door closed.

    Measure how far the door covers the frame at the hinge side. See how to measure overlay.

Print the hinge measurement sheet

Compare Grass TEC 839/850 plate stamps and replacements

Match the existing overlay, then verify the exact hinge’s mounting style, cup, and screw holes. The 839-04, 839-05, and 839-27 options shown here use doweled cups. Follow the fitting drawing for your exact door and hinge.

Grass TEC 839 and 850 hinge replacement chart by plate stamp and existing door overlay
Plate stampExisting door overlaySoft-closeSelf-closeBase-plate spacer
839-04 / 839-05⅝″01995A-15Doweled cup.01864-15Doweled cup.None listed
839-27⁷⁄₁₆″02858A-15Doweled cup.02904-15Doweled cup.None listed
839-28½″04423A-1504387-15None listed
839-731½″04549A-1504469-15None listed

Part numbers and spacers are from the Grass TEC 839/850 replacement chart. Check the standard TEC 864 fitting drawing and the Grass TEC technical catalog for your exact hinge. Grass lists screws and spacers separately.

Grass TEC 839/850 replacement questions

Do 839-04 and 839-05 use the same replacement?

Grass groups both stamps at ⅝″ overlay. The chart prints an extra digit in the self-close number. Its seller link identifies 01864-15. Check the 839-04 and 839-05 replacement.

Which holes carry over to the new hinge?

The Grass retrofit drawing reuses the round cup bore and matching frame holes. The door-side screw positions change. Check the instructions for when to remove dowels. Read the Grass fitting drawing.

Can I use the overlay by itself?

Start with both the stamp and measurement, then compare the mount and both hole patterns. The TEC 830 family includes some overlapping measurements and different parts. Compare TEC 830 stamps.

If your stamp is missing or unreadable

For a different stamp, check the other hinge families in the full manufacturer chart. For a worn stamp, frameless cabinet, or different hinge style, identify the hinge from its markings, photos, and measurements first.